Plywood floor

Chris spent last month priming and painting all the basement rooms. The next phase of the remodel and out major goal before Baby arrives is to install flooring in every room down there, so we are not traipsing dirt and drywall dust into the main part of the house. Having researched a variety of options, most of them were not in our budget. So with a little inspiration from Pinterest I decided a 'plywood floor' in the guest bedroom would be a great solution. Chris had to be convinced as he was the one that would need to do most of the work, but he soon came around to his pregnant wife's grand idea. (He's a keeper for sure!!). He stipulated one condition though - I had to go to Home Depot and get the plywood.

So off I toddled to Home Depot, looking pregnant and trying my hardest to speak with my best English accent (its fading fast). Two very helpful guys helped my choose plywood for the subfloor (to go over the cement slab) and plywood to be cut into 8 inch planks, which would eventually become the new flooring.  They even used their industrial cutter to make those 8 inch planks for me. Once I had all my wood (3 hours later) I called Chris and Cody to come collect it all for me in Cody's truck (Thanks Cody!!).

10 pieces of 4'x8' ready to be sliced into 8 inch planks

                             

My two very helpful men, cutting the 10 sheets of plywood into 8" x 8' planks

Next job was to empty the guest room of clutter and prep for the sub floor. We needed to install a sub floor because it would have been impossible to nail or glue the plywood planks directly to the cement. Plus if we were to get any moisture down there, which is a possibility because it is below ground, then we needed to prevent water damage.

The guest room ready empty and ready for the sub floor

We laid 2 sheets of 6 mil plastic, just in case any water started to seep through the cement

Chris had to pre drill holes in the cement and then get the cement screws in place. Every screw was a battle and in total we went through about 15 drill bits because the cement was so dense. After a full day the 3/4 inch plywood sub floor was in place.

Meanwhile, I spent my time sanding all the plywood planks to get rid of any major splinters, smooth the coarse mill finish and remove any stamps or ink marks on the surface. It was a process. 

Eventually the planks were ready to be glued and nailed in place. We invested in a nail gun, which made the nailing go super quick. We used a random metal bracket as the spacer between the planks. We were going for the rustic, farmhouse cottage look, so some discrepancies in the spacing wasn't an issue for us. 

Installing the plywood planks took a day. 

We were pleased with the outcome, but needed to stain and polyurethane the wood in order for it to be a useable floor. The plywood is too soft to leave in 'au naturale'.

I decided to do a white wash stain over the plywood, so you could still see the grain, but without all the pink tinges of the plywood.  I mixed one part white primer with two parts water, and slopped it on using a paint roller. 

After 2 coats of stain, Chris covered the wood with 2 coats of polyurethane. We would have done another coat, just to further protect the wood, however the smell throughout the house was too much to deal with being pregnant, so we stopped at two.

I think it turned out pretty good. 

Semi-gloss finish

Nice wide planks, good spacing and the wood grain is still visible. 

Overall, we are super pleased with the outcome. Once the sub floor was in place, the planks went down really easily, especially once we figured out that the glue came out the gun with a lot less effort if it was warmed before hand. Cold glue is difficult to work with!! All up it probably came to around $3 a square foot. A little more expensive then we had anticipated, but the sub floor probably cost $2 a square foot to install. Considering the wide, planked flooring we had been looking at was over $10 a square foot, I think it was a great investment. Hopefully once we start using the room as a guest room, it holds up to the wear and tear. I'll keep you updated!

The Basement

After a year long hiatus from anything involving a saw, nails or paint, it was time to get back on it and start the Basement Remodel!!!

We are pretty excited about this! Chris probably more so than me because his beloved Man Cave is becoming a reality not just a far fetched fantasy!! I'm happy because I get to declutter, sort and organise (throw out) a growing mountain of junk that is being stored in the basement! Plus I also get to design the second bathroom and guest bedroom!

Here's a preview of the before, very cluttered basement, and then some of the work in progress! First job is framing, then electric, insulation and drywall. Hopefully this will all be completed by late Spring!

BEFORE: Laundry Space

BEFORE: The man cave, with the ever increasing pile of junk!

BEFORE: The guest bathroom to the left and another pile of junk where the guest bedroom will eventually be!

AFTER: Framed Laundry Room

AFTER: Pile of junk and framed MAN CAVE

View from MAN CAVE of the eventual MUD ROOM, which will also be framed. Eduardo, the guy who basically built our house is back again helping out with the Basement remodel! He brought a couple of new guys to help with this project!

AFTER: Framed Bathroom. Low ceiling because of pipes above  - not ideal but will be 80 inches high which just passes code requirements!!

Framed partition/closet in the guest bedroom - looks a little weird but saw it on Pinterest and think it will look really cool when finished!! (Chris is not so sure - we will see!!)

View from the closet in the guest bedroom! To the left is the mechanical room. To the right is the doorway with the bathroom behind it.

Headboard project

I saw an adorable diamond tufted headboard on Pinterest a year or so ago, so pinned it to my DIY board with the intention that one day when i had some spare time, I would make a similar one! Well that day came last month!

I made a list of essential items needed and headed to Joanne's fabric in Denver (a big trip out for this mountain girl!!). The list looked like this:

• fabric (about 7ft- enough for buttons and wrapping around board and foam) - I wanted a mustard yellow colour. Choice was limited do I ended up with a linen fabric.
• 2" foam
• batting
• button kit
• upholestry needle
• twine
• staples for staple gun

I also headed to Home Depot and picked up:

• plywood (3/4")
• glue

With all my supplies bought (approx $150) I headed home and started the big project!

I got the circular saw and chalk line out and marked, measured and cut out the headboard dimensions (52"x 39").

With the chalk line I also marked out grid lines on the wood which enabled me to mark the location of each button placement. I used a drill to make holes at the button locations.

The dirty work was done so I moved the board up to the kitchen table. This provided a better working height for the next part of the project!! I cut the foam out to the dimensions of the board and used glue to attach it down.

While that was drying I ironed the fabric and made the buttons following the kit directions!!

 

I laid the batting, then the fabric over the foam and board!! This provided a plush layer for the headboard! The next part of the project was best performed with a helper!! I started in the middle of the top row and from underneath used the upholestry needle to push the twine through the hole and the foam/fabric to the front of the headboard. Attaching a button to the twine, I then reversed the needle through the hole, threaded it with the twine and pulled it through to the back of the board.

I got my helper to push the button deep into the foam from the front, while from underneath I tied a knot in the twine then used a staple gun to secure it in place. I zigzagged the twine back a forth, stapling as much as necessary, in order to keep tension on the twine.

I repeated this technique with all the buttons, keeping the fabric smooth and tight.

The headboard was turned over, the excess fabric trimmed and then stapled down in place.

....and voila!! My lovely mustard headboard!!! I left the bottom 9" plain (no buttons) as this sits behind the mattress and isn't seen. I'm pretty pleased with my first attempt and plan on making one for our king bed!!